Punjab's construction sector — from Ludhiana's industrial sheds to Chandigarh's high-rises — relies on IS 1161 compliant scaffolding tie rods. Hardev Hydraulics supplies thread rolling machines in Ludhiana specifically configured for high-volume tie rod production with wing-nut compatible thread forms and fatigue-resistant rolled thread roots.
Punjab's construction industry consumes millions of scaffolding tie rods annually — on residential towers, industrial sheds, bridges, metro viaducts and formwork systems. Ludhiana is home to several scaffolding equipment manufacturers who supply the state. Hardev Hydraulics provides thread rolling machines configured for tie rod production — with die sets matched to 1-inch (25.4mm) and 1.25-inch (31.75mm) rod diameters as standard, and custom sizes on request.
IS 1161 specifies the steel tube standard for scaffolding; the threaded tie rod connecting two opposing standards through a wall or formwork must carry 20–60 kN without yield. Thread rolling produces stronger threads than cut threading — critical for scaffold safety where a thread failure can be catastrophic. Our Ludhiana machines produce wing-nut compatible threads at 20–35 pieces per minute.
Two Roll for 1-inch tie rods (M16–M24); Three Roll for 1.25-inch and larger tie rods (M25–M36). Both configured and available from our Ludhiana factory.
Recommended for 16mm, 20mm and 25mm diameter tie rods. Produces 20–35 wing-nut compatible threads per minute. Standard die set covers the most common tie rod thread forms used in Punjab's construction industry.
| Rod Diameter | M16 – M25 |
| Hydraulic Force | 36 Metric Tons |
| Motor Power | 7.5 kW |
| Production Speed | 20 – 35 pcs/min |
| Thread Compatibility | Wing nut, prop nut, coupler |
For 30mm, 32mm and 36mm tie rods and acrow/jack prop outer tube threading. Balanced three-roll force ensures concentricity on long rods. Also handles M36–M52 prop tube threading.
| Rod / Tube Range | M25 – M52 |
| Hydraulic Force | 22 Metric Tons |
| Motor Power | 5.5 kW |
| Production Speed | 15 – 30 pcs/min |
| Thread Compatibility | Wing nut, prop nut, coupler, IS standard |
Our die sets produce threads dimensionally matched to standard Indian wing nuts — ensuring smooth engagement and firm tightening across all Punjab construction hardware brands.
IS 1161 specifies structural requirements for scaffolding tubes. Our rolled thread tie rods meet and exceed the fatigue requirements for form ties carrying wet concrete pressure.
From Ludhiana's industrial sheds to Chandigarh's multi-storey residentials and Amritsar's commercial projects — Punjab's construction sites trust rolled-thread tie rods for formwork safety.
The same Three Roll machine that threads tie rods can thread acrow prop and jack prop outer tubes (M36–M52) — versatile for manufacturers who supply both tie rods and props.
Machines are available for same-day truck loading from our Industrial Area Phase-2 factory. Punjab contractors and tie rod manufacturers can collect machines without waiting for outstation dispatch.
Ludhiana-based engineers handle installation, die changeover training and maintenance. Response time for service calls within Ludhiana: same day. Across Punjab: next working day.
Tell us your rod diameter, thread form and daily production target. We will configure the right machine with factory-direct pricing in 24 hours.
