Ludhiana is home to hundreds of auto-component manufacturers serving Tata, Mahindra, Bajaj and Hero. Hardev Hydraulics' spline rolling machine cold-forms involute splines and serrations on drive shafts, axles and gearbox shafts — right here in Ludhiana, with factory-direct pricing and fast local after-sales service.
Ludhiana's auto-component cluster — spanning Focal Point, Dhandari Khurd, Sherpur and Sahnewal — produces shafts, axles, gearbox components and drive train hardware for India's major OEMs. Hardev Hydraulics' spline rolling machine cold-forms involute splines and serrations on these components with 30–40% higher fatigue strength than machined (hobbed) splines.
Cold-formed splines have no machining chips, no material waste, and a work-hardened tooth profile that resists wear under cyclic torque loading — precisely the condition drive shafts experience throughout vehicle life. Our Ludhiana-built spline rolling machine produces splines from shaft diameters of 15mm to 80mm in a single rolling cycle.
Available for direct factory pickup from Industrial Area Phase-2, Ludhiana or delivery within Punjab.
Hydraulic two-roll spline rolling machine for involute splines and serrations on automotive shafts. Handles shaft diameters 15–80mm with EN31 profile dies precision-ground to your spline specification.
| Shaft Diameter Range | 15 – 80 mm |
| Hydraulic Force | 36 Metric Tons |
| Motor Power | 7.5 kW |
| Spline Standards | ANSI B92.1, DIN 5480, custom |
| Production Speed | 20 – 60 pcs/min |
Planetary three-roll machine for larger diameter shaft splines requiring higher concentricity. Suitable for heavy-duty drive shafts, axle shafts and PTO (power take-off) shafts above 40mm diameter.
| Shaft Diameter Range | 25 – 100 mm |
| Hydraulic Force | 22 Metric Tons |
| Motor Power | 5.5 kW |
| Production Speed | 15 – 40 pcs/min |
Ludhiana auto-component units supplying Tata, Mahindra, Bajaj and Hero are our customers. We understand OEM spline quality standards and can match your customer's drawing requirements.
Cold-rolled splines have 30–40% higher fatigue strength than hobbed (gear-cut) splines. The rolled tooth surface is work-hardened, resisting wear under the cyclic torque loads of vehicle drive systems.
We manufacture spline die rolls to your exact tooth profile — involute splines, parallel-side splines, serrations and custom forms. Provide your drawing; we confirm the die profile before manufacture.
Visit our Industrial Area Phase-2 factory with your sample shaft. We will run the spline rolling machine on your actual component so you can verify the spline form before ordering.
Our Ludhiana engineers install, commission and maintain your spline rolling machine. For auto-component plants in Ludhiana's industrial areas, same-day service is our standard response time.
Our Ludhiana factory holds ISO 9001:2015 certification — required for OEM vendor registration. Machine quality documentation is available for your vendor qualification process.
Share your shaft diameter, spline specification and production volume. We will recommend the right machine with factory-direct pricing within 24 hours.
